For complex fleets
Ruptela HCV5 Lite
Two CAN channels, serial interfaces and a larger backup battery for demanding fleet tracking applications.
- Network
- 4G LTE Cat 1 + 2G
- Installation
- Hardwired installation
- Interfaces
- 2× CAN · RS232 / RS485 / K-Line
- Protection
- IP54
More specifications
- Bluetooth
- BLE 5.0
- Power supply
- 9–32 V DC
- Backup battery
- 1,050 mAh
- Dimensions
- 101 × 74 × 23 mm
- Expansion
- 3 DIN · 2 AIN · 4 DOUT · 1-Wire
Tachograph downloads require a compatible vehicle, correct wiring and a separately agreed back-end service. Serial interfaces depend on the configuration.
Manufacturer’s product page ↗OBD plug-in tracker
Ruptela Plug5
Plugs directly into the diagnostic port. Location tracking with supported OBD, CAN and fault-code data in one device.
- Network
- 4G LTE-M + 2G
- Installation
- OBD-II, plug and play
- Interfaces
- OBD-II · CAN · DTC
- Protection
- IP41
More specifications
- Bluetooth
- BLE 5.1
- Power supply
- 9–30 V DC
- Backup battery
- Internal backup battery
- Dimensions
- 70 × 56 × 28 mm
- Expansion
- 16 MB internal memory
Available vehicle data varies by model. We also check LTE-M network support before deployment.
Manufacturer’s product page ↗Everyday vehicle tracking
Ruptela ECO5 Lite
A slim, discreetly installed tracker for everyday routes, ignition status and driving events.
- Network
- 4G LTE Cat 1 + 2G
- Installation
- 5-wire connection
- Interfaces
- DIN · AIN/DIN · DOUT
- Protection
- IP54
More specifications
- Bluetooth
- BLE 5.0
- Power supply
- 9–32 V DC
- Backup battery
- 180 mAh
- Dimensions
- 95 × 51 × 14 mm
- Expansion
- 8 MB internal memory
Additional sensors and relay control require separate accessories, wiring and configuration.
Manufacturer’s product page ↗CAN / OBD data reading
Ruptela Smart5
CAN and OBD data reading, CustomCAN and expandable connections when you need more than vehicle location.
- Network
- 4G LTE Cat 1 + 2G
- Installation
- Hardwired, 12-wire connection
- Interfaces
- 1× CAN · OBD · CustomCAN
- Protection
- IP54
More specifications
- Bluetooth
- BLE 5.0
- Power supply
- 9–32 V DC
- Backup battery
- 180 mAh
- Dimensions
- 95 × 51 × 14 mm
- Expansion
- 3 DIN · AIN/DIN · 2 DOUT · 1-Wire
Odometer, fuel level and other CAN data depend on the vehicle model and installation.
Manufacturer’s product page ↗Battery-mounted tracker
Ruptela ECO5 BM
U-terminal power connection, an IP68 enclosure and wireless expandability, without dismantling the dashboard.
- Network
- 4G LTE Cat 1 + 2G
- Installation
- Directly on the vehicle battery
- Interfaces
- U-terminal battery connection
- Protection
- IP68
More specifications
- Bluetooth
- BLE 5.0
- Power supply
- 9–32 V DC
- Backup battery
- 180 mAh
- Dimensions
- 98 × 56 × 21 mm
- Expansion
- 8 MB internal memory
Choose an engine-bay location within the device’s temperature limits and with suitable satellite reception.
Manufacturer’s product page ↗Expandable vehicle monitoring
Ruptela ECO5
Multiple inputs and outputs, 1-Wire and Bluetooth for integrating driver identifiers, temperature probes and other accessories.
- Network
- 4G LTE Cat 1 + 2G
- Installation
- 12-wire connection
- Interfaces
- 4 DIN · 2 AIN/DIN · 2 DOUT
- Protection
- IP54
More specifications
- Bluetooth
- BLE 5.0
- Power supply
- 9–32 V DC
- Backup battery
- 180 mAh
- Dimensions
- 95 × 51 × 14 mm
- Expansion
- 1-Wire · 8 MB memory
Sensors are separate accessories. The ECO5 shown here is the IP54 version for installation in a protected location.
Manufacturer’s product page ↗Device prices include VAT and were checked on 14 September 2026. SIM, software subscription, installation and accessories are quoted separately. Prices and terms shown in the shop at the time of ordering apply.
